CuAl11Fe6Ni6-C ( CC334G )
| Gred % 3a | CuAl11Fe6Ni6-C |
| Nombor: | CC334G |
| Klasifikasi: | Tembaga-aluminium aloi |
| Standard: | EN 1982: 2008 Tembaga dan tembaga aloi. Ingots dan pemutus |
| Setaraf gred: |
Kimia komposisi % daripada gred CuAl11Fe6Ni6-C ( CC334G )
| A akhiran -C is added to the designation to identify material in the form of castings |
| Fe | Si | Ni | Al | Cu | Mg | Zn | Sn | ||
| 4 - 7 | max 0.1 | max 2.5 | 4 - 7.5 | 10 - 12 | 72 - 82.5 | max 0.05 | max 0.05 | max 0.5 | max 0.2 |
Mechanical properties of grade CuAl11Fe6Ni6-C ( CC334G )
| Rm - Tegangan kekuatan (MPa) (GS) | 680 |
| Rm - Tensile strength (MPa) (GM) or (GZ) | 750 |
| Rp0.2 0.2% proof strength (MPa) (GS) | 320 |
| Rp0.2 0.2% proof strength (MPa) (GM) or (GZ) | 380 |
| A - Min. elongation at fracture (%) (GS) or (GZ) or (GM) | 5 |
| Brinell kekerasan (HBW): (GS) | 170 |
| Brinell kekerasan (HBW): (GM) or (GZ) | 185 |
Setara gred of grade CuAl11Fe6Ni6-C ( CC334G )
Amaran! Only for rujukan
| EU EN |
Jerman DIN,WNr |
||||||
| CuAl11Fe6Ni6-C |
|
Casting proses
| GS | Pasir pemutus |
| GM | Kekal acuan pemutus |
| GZ | Centrifugal casting |
| GC | Berterusan pemutus |
| GP | Pressure die casting |
Bahan syarat
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Bahan keadaan ditetapkan oleh the minimum value of hardness requirement for the product with mandatori kekerasan requirements |
Mekanikal sifat
| REh | Minimum hasil kekuatan / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum pemanjangan / Mindestwert der Bruchdehnung / Allongement minimum |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuAl11Fe6Ni6-C ( CC334G ) Tembaga-aluminium aloi |
